ZyXEL Communications NWA3000-N User Manual

 Chapter 9 Wireless

NWA3000-N Series User’s Guide

Use this screen to manage all of the APs connected to the NWA3000-N series AP. 
Click Configuration > Wireless > AP Management to access this screen. This 
screen manages the NWA3000-N series AP’s general wireless settings if it is in 
standalone mode or the general wireless settings of all of the NWA3000-N series 
AP’s managed APs if the NWA3000-N series AP is in controller mode.  

Figure 44   Configuration > Wireless > AP Management (Controller Mode)     

The following fields display if the NNWA3000-N series AP is in controller mode. 

Table 37   Configuration > Wireless > AP Management (Controller Mode)

Edit

Select an AP and click this button to edit its properties.

Remove

Select an AP and click this button to remove it from the list.

Note: If in the Configuration > Wireless > Controller screen 

you set the Registration Type to Always Accept, then as 
soon as you remove an AP from this list it reconnects. 

Reboot

Select an AP and click this button to force it to restart.

#

This field is a sequential value, and it is not associated with any 
interface.

IP Address

This field displays the IP address of the AP.

MAC

This field displays the MAC address of the AP.

Model

This field displays the AP’s hardware model information. It displays 
“N/A” (not applicable) only when the AP disconnects from the 
NWA3000-N series AP and the information is unavailable as a result.

R1 Mode / Profile

This field displays the AP or MON profile for Radio 1.

R2 Mode / Profile

If the NWA3000-N series AP has a second radio this field displays the 
AP or MON profile for Radio 2.

Mgnt. VLAN ID

This field displays the ID of the AP’s management VLAN.

Description

This field displays the AP’s description, which you can configure by 
selecting the AP and clicking the Edit button.