ZyXEL Communications NWA3000-N User Manual

 Chapter 11 User

NWA3000-N Series User’s Guide

User Type

These are the kinds of user account the NWA3000-N series AP 
supports.

• admin - this user can look at and change the configuration 

of the NWA3000-N series AP

• limited-admin - this user can look at the configuration of 

the NWA3000-N series AP but not to change it

• user - this is used for embedded RADIUS server and 

SNMPv3 user access

Lease Time 

This is the default lease time in minutes for each type of user 
account. It defines the number of minutes the user has to 
renew the current session before the user is logged out.

Admin users renew the session every time the main screen 
refreshes in the Web Configurator. 

Reauthentication 

Time

This is the default reauthentication time in minutes for each 
type of user account. It defines the number of minutes the 
user can be logged into the NWA3000-N series AP in one 
session before having to log in again. Unlike Lease Time, the 
user has no opportunity to renew the session without logging 
out.

User Logon Settings

Limit the number of 

simultaneous logons 

for administration 

account

Select this check box if you want to set a limit on the number 
of simultaneous logins by admin users. If you do not select 
this, admin users can login as many times as they want at the 
same time using the same or different IP addresses.

Maximum number per 

administration 

account

This field is effective when Limit ... for administration 
account is checked. Type the maximum number of 
simultaneous logins by each admin user. 

User Lockout Settings

Enable logon retry 

limit

Select this check box to set a limit on the number of times 
each user can login unsuccessfully (for example, wrong 
password) before the IP address is locked out for a specified 
amount of time.

Maximum retry count

This field is effective when Enable logon retry limit is 
checked. Type the maximum number of times each user can 
login unsuccessfully before the IP address is locked out for the 
specified lockout period. The number must be between 1 and 
99.

Lockout period

This field is effective when Enable logon retry limit is 
checked. Type the number of minutes the user must wait to try 
to login again, if logon retry limit is enabled and the 
maximum retry count is reached. This number must be 
between 1 and 65,535 (about 45.5 days).

Apply

Click Apply to save the changes. 

Reset

Click Reset to return the screen to its last-saved settings.  

Table 50   Configuration > Object > User > Setting (continued)