ZyXEL Communications NWA3000-N User Manual

 Chapter 15 System

NWA3000-N Series User’s Guide

The following table describes the labels in this screen.  

The NWA3000-N series AP can use its internal Remote Authentication Dial In User 
Service (RADIUS) server to authenticate the wireless clients of trusted APs. 
RADIUS is a protocol that enables you to control access to a network by 
authenticating user credentials.

Table 79   Configuration > System > SNMP

User Name

Select the user name of the user account for which this SNMPv3 user 
profile is configured.

Authentication

Select the type of authentication the SNMPv3 user must use to connect 
to the NWA3000-N series AP using this SNMPv3 user profile.

Select NONE to not authenticate the SNMPv3 user.

Select MD5 to require the SNMPv3 user’s password be encrypted by 
MD5 for authentication.

Select SHA to require the SNMPv3 user’s password be encrypted by SHA 
for authentication.

Privacy

Select the type of encryption the SNMPv3 user must use to connect to 
the NWA3000-N series AP using this SNMPv3 user profile.

Select NONE to not encrypt the SNMPv3 communications.

Select DES to use DES to encrypt the SNMPv3 communications.

Select AES to use AES to encrypt the SNMPv3 communications.

Privilege

Select whether the SNMPv3 user can have read-only or read and write 
access to the NWA3000-N series AP using this SNMPv3 user profile.

OK

Click OK to

 

save your changes back to the NWA3000-N series AP.

Cancel

Click Cancel to exit this screen without saving your changes.