ZyXEL Communications NWA3000-N User Manual
Chapter 1 Introduction
NWA3000-N Series User’s Guide
24
The following figure illustrates a CAPWAP wireless network. The user (U)
configures the controller AP (C), which then automatically updates the
configurations of the managed APs (M1 ~ M4).
configures the controller AP (C), which then automatically updates the
configurations of the managed APs (M1 ~ M4).
Figure 7 CAPWAP Network Example
1.4 Ways to Manage the NWA3000-N series AP
You can use the following ways to manage the NWA3000-N series AP.
Web Configurator
The Web Configurator allows easy NWA3000-N series AP setup and management
using an Internet browser. This User’s Guide provides information about the Web
Configurator.
using an Internet browser. This User’s Guide provides information about the Web
Configurator.
Command-Line Interface (CLI)
The CLI allows you to use text-based commands to configure the NWA3000-N
series AP. You can access it using remote management (for example, SSH or
Telnet) or via the console port. See the Command Reference Guide for more
information.
series AP. You can access it using remote management (for example, SSH or
Telnet) or via the console port. See the Command Reference Guide for more
information.
U
C
M1
M2
M3
M4