ZyXEL Communications NWA3000-N User Manual

Chapter 17 File Manager

NWA3000-N Series User’s Guide

Click Maintenance > File Manager > Firmware Package to open this screen. 
Use the Firmware Package screen to check your current firmware version and 
upload firmware to the NWA3000-N series AP.

Note: The Web Configurator is the recommended method for uploading firmware. You 

only need to use the command line interface if you need to recover the 
firmware. See the CLI Reference Guide for how to determine if you need to 
recover the firmware and how to recover it.

Find the firmware package at www.zyxel.com in a file that (usually) uses a .bin 
extension. 

Figure 114   Maintenance > File Manager > Firmware Package     

The following table describes the labels in this screen.  

Table 89   Maintenance > File Manager > Firmware Package

Boot 
Module

This is the version of the boot module that is currently on the NWA3000-N 
series AP.

Current 
Version

This is the firmware version and the date created. 

Released 
Date

This is the date that the version of the firmware was created. 

File Path  Type in the location of the file you want to upload in this field or click Browse 

... to find it.

Browse...  Click Browse... to find the .bin file you want to upload. Remember that you 

must decompress compressed (.zip) files before you can upload them. 

Upload 

Click Upload to begin the upload process. This process may take up to two 
minutes.