ZyXEL Communications NWA3000-N User Manual

 Chapter 4 Tutorials

NWA3000-N Series User’s Guide

Click Configuration > Wireless > DCS.

Select Enable Dynamic Channel Selection to turn on this feature.

Set the DCS Time Interval. This is how often the NWA3000-N series AP surveys 
the other APs within its broadcast radius. If you place your APs in an area with a 
large number of competing APs, set this number lower to ensure that your device 
can adjust quickly changing conditions.

Select DCS Sensitivity Level. This is how sensitive the APs on your network are 
to other channels. Generally, as long as the area in which your AP is located has 
minimal interference from other devices you can set the DCS Sensitivity Level to 
Low. This means that the AP has a very broad tolerance.

Select Enable DCS Client Aware. Select this so that the APs on your network do 
not change channels as long as any wireless clients are connected to them. When 
they must change channels, they will wait until all stations disconnect first.

Set the 2.4-GHz Channel Selection Method to auto.

Select a 2.4 GHz Channel Deployment scheme. Choose Three-Channel 
Deployment to have the device rotate through 3 channels. Choose Four-
Channel Deployment to have the device rotate through 4 channels, if allowed.

Click Apply to save your changes.

See also: