ZyXEL Communications NWA3000-N User Manual

Chapter 6 Monitor

NWA3000-N Series User’s Guide

Use this screen to configure an entry for linking to a compatible legacy AP’s Web 
Configurator. The legacy AP must also be in controller mode. Click Monitor > 
Wireless > Rogue AP > Legacy Device Info and then click the Add button or 
select a radio profile from the list and click the Edit button to access this screen.

Figure 35   Monitor > Wireless > Legacy Device Info > Add 

The following table describes the labels in this screen. 

Log messages are stored in two separate logs, one for regular log messages and 
one for debugging messages. In the regular log, you can look at all the log 
messages by selecting All Logs, or you can select a specific category of log 
messages (for example, user). You can also look at the debugging log by selecting 
Debug Log. All debugging messages have the same priority. 

To access this screen, click Monitor > Log. The log is displayed in the following 
screen.

IP

This is the IP address of the legacy AP.

Description

This is manually entered information about the legacy AP represented by 
this entry.

Table 29   Monitor > Wireless > Legacy Device Info (continued)

Table 30   Monitor > Wireless > Legacy Device Info

Device IP 
Address

Enter the legacy AP’s IP address.

Description

Enter a description to help you identify the legacy AP. 

OK

Click OK to

 

save your changes back to the NWA3000-N series AP.

Cancel

Click Cancel to exit this screen without saving your changes.