ZyXEL Communications NWA-3160 User Manual
Chapter 6 AP Controller Mode
NWA-3160 Series User’s Guide
102
6.6 Redundancy Screen
Use this screen to set the controller AP as a primary or secondary controller.
If you set your NWA as a primary controller AP, you can have a secondary
controller AP to serve as a backup. All configurations are synchronized between
the NWA and the secondary controller AP.
controller AP to serve as a backup. All configurations are synchronized between
the NWA and the secondary controller AP.
When the NWA is in AP controller mode, click CONTROLLER > Redundancy. The
following screen displays.
following screen displays.
Figure 66 Redundancy Screen
The following table describes the labels in this screen.
Table 15 Redundancy Screen
LABEL
DESCRIPTION
Redundancy
Select Enable to set the NWA either as a Primary AP
Controller or as a Secondary Controller AP.
Controller or as a Secondary Controller AP.
Select Disable when the NWA acts as a primary AP
controller without a backup.
controller without a backup.
Primary AP Controller
Select this if the NWA has a secondary controller AP. You
must give the IP address of this backup in the field below.
must give the IP address of this backup in the field below.
Secondary IP
Enter the IP address of the secondary controller AP.
Secondary AP Controller
Select this if the NWA is the secondary controller AP.
Apply
Click this to save the changes in this screen.
Reset
Click this to return the fields in this screen to their
previously-saved values.
previously-saved values.