ZyXEL Communications NWA-3160 User Manual
Chapter 7 System Screens
NWA-3160 Series User’s Guide
111
Once you have decided on the network number, pick an IP address that is easy to
remember, for instance, 192.168.1.2, for your device, but make sure that no other
device on your network is using that IP address.
remember, for instance, 192.168.1.2, for your device, but make sure that no other
device on your network is using that IP address.
The subnet mask specifies the network number portion of an IP address. Your
device will compute the subnet mask automatically based on the IP address that
you entered. You don't need to change the subnet mask computed by the device
unless you are instructed to do otherwise.
device will compute the subnet mask automatically based on the IP address that
you entered. You don't need to change the subnet mask computed by the device
unless you are instructed to do otherwise.
7.2 General Screen
Use the General screen to identify your NWA over the network. Click System >
General. The following screen displays.
General. The following screen displays.
Figure 70 System > General
The following table describes the labels in this screen.
Table 19 System > General
LABEL
DESCRIPTION
General Setup
System Name
System Name
Type a descriptive name to identify the NWA in the Ethernet
network.
network.
This name can be up to 30 alphanumeric characters long. Spaces are
not allowed, but dashes "-" and underscores "_" are accepted.
not allowed, but dashes "-" and underscores "_" are accepted.
If you want to log into the NWA using the System Name, enter a
name not longer than 15 alphanumeric characters.
name not longer than 15 alphanumeric characters.
Domain Name
This is not a required field. Leave this field blank or enter the domain
name here if you know it.
name here if you know it.