ZyXEL Communications NWA-3160 User Manual

Chapter 14 IP Screen

NWA-3160 Series User’s Guide

These parameters should work for the majority of installations.

Use this screen to configure the IP address for your NWA. Click IP to display the 
following screen.

Figure 107   IP Setup

The following table describes the labels in this screen.

Table 50   IP Setup

IP Address Assignment 
Get automatically 
from DHCP 

Select this option if your NWA is using a dynamically assigned IP 
address from a DHCP server each time. 

Note: You must know the IP address assigned to the NWA (by 

the DHCP server) to access the NWA again. 

Use fixed IP address Select this option if your NWA is using a static IP address. When 

you select this option, fill in the fields below.

IP Address

Enter the IP address of your NWA in dotted decimal notation. 

Note: If you change the NWA's IP address, you must use the 

new IP address if you want to access the web 
configurator again.

IP Subnet Mask

Type the subnet mask.

Gateway IP Address  Type the IP address of the gateway. The gateway is an immediate 

neighbor of your NWA that will forward the packet to the 
destination. On the LAN, the gateway must be a router on the 
same segment as your NWA; over the WAN, the gateway must be 
the IP address of one of the remote nodes.

Apply

Click Apply to save your changes.

Reset

Click Reset to begin configuring this screen afresh.