ZyXEL Communications NWA-3160 User Manual

 Chapter 6 AP Controller Mode

NWA-3160 Series User’s Guide

Use this screen to view and add managed APs. By default, the controller NWA is 
always included in this table. Although you cannot remove it, you can edit its 
settings.

2.4GHz

This field displays the number of wireless clients associated with 
APs managed by the NWA (including the NWA itself) using 
2.4GHz radio.

Redundancy 

The table below shows when redundancy is enabled (see 

) and the NWA acts as the primary AP controller.

Redundancy Device

This field displays the IP address of the secondary AP controller.

Last Synchronization 
Result 

This field displays whether the last synchronization with the 
secondary AP controller succeeded (SUCCESS) or failed 
(DISABLED).

Last Synchronization 
Time 

This field displays the last date and time when the NWA 
synchronized settings with the secondary AP controller.

Alive Status 

This field displays either NO RESPONSE (the secondary AP 
controller is down) or ALIVE (the secondary AP controller is 
active).

System Status
AP List

Click this to see a list of the APs managed by the NWA.

AP Statistics

Click this to see packet statistics related to each of the APs 
managed by the NWA.

Association List

Click this to see information about each of the wireless clients 
connected to APs managed by the NWA. This does not include the 
NWA itself.

SSID Information

Click this to see details of the security settings used by each 
SSID, and the number of wireless clients associated with each 
SSID.

Table 11   Status Screen