ZyXEL Communications P841C User Manual

P841C Central-Side VDSL Modem 

Ethernet-Related Commands 

5-3 

5.1.2  Enet Clear Command 

enet clear 

Type this command to clear P841C and the subscriber’s VDSL modem’s Ethernet statistics (if link is up). 

5.1.3  Enet Speed (lt|nt) (speed) Command 

enet speed (lt|nt) (speed) 

Type this command to set the Ethernet port speed of the P841C (with “lt”) or P841 (with “nt”). P841C speed is 
displayed if you just type “enet speed”. 

Speed index number 

Speed/Flow Control 

0 Auto 

Negotiation 

1 

10 Mbits/s, Half Duplex 

2 

10 Mbits/s, Full Duplex 

3 

100Mbits/s, Half Duplex 

4 

100Mbits/s, Full Duplex 

 

5.1.4  Enet full duplex Fctrl (lt|nt) [on|off] Command 

enet full duplex fctrl (lt|nt) [on|off] 

Type this command to set the Ethernet port flow control or show the Ethernet port flow control status (without 
“on” or “off”). By default, flow control is on for full duplex Ethernet connections and off for half duplex Ethernet 
connections. 

5.1.5  Enet Monitor [on|off] Command 

enet monitor [on|off] 

P841C>enet fctrl 
enet full duplex flow control(LT): on 

P841C>enet speed 
enet speed(LT): Auto