ZyXEL Communications NWA1121NI User Manual
Chapter 4 Tutorial
NWA1121-NI User’s Guide
30
) to provide multiple wireless networks. Each wireless network will cater to a
different type of user.
You want to make three wireless networks: one standard office wireless network with all the same
settings you already have, another wireless network with high priority QoS settings for Voice over
IP (VoIP) users, and a guest network that allows visitors to access only the Internet and the
network printer.
settings you already have, another wireless network with high priority QoS settings for Voice over
IP (VoIP) users, and a guest network that allows visitors to access only the Internet and the
network printer.
To do this, you will take the following steps:
1
Edit the SSID profiles.
2
Change the operating mode from Root AP to MBSSID and reactivate the standard network.
3
Configure different security modes for the networks.
4
Configure a wireless network for standard office use.
5
Configure a wireless network for VoIP users.
6
Configure a wireless network for guests to your office.
The following figure shows the multiple networks you want to set up. Your NWA1121-NI is marked
Z, the main network router is marked A, and your network printer is marked B.
Z, the main network router is marked A, and your network printer is marked B.
The standard network (SSID01) has access to all resources. The VoIP network (VoIP_SSID) has
access to all resources and a high QoS priority. The guest network (Guest_SSID) has access to the
Internet and the network printer only, and a low QoS priority.
access to all resources and a high QoS priority. The guest network (Guest_SSID) has access to the
Internet and the network printer only, and a low QoS priority.
Z
A
B