ZyXEL Communications NBG4615 User Manual

 Chapter 15 Wireless LAN

NBG4615 User’s Guide

Use this screen when you want to add a wireless station using WPS. To open this screen, click 
Network > Wireless LAN > WPS Station tab.

Note: After you click Push Button on this screen, you have to press a similar button in 

the wireless station utility within 2 minutes. To add the second wireless station, you 

have to press these buttons on both device and the wireless station again after the 

first 2 minutes.

Network > Wireless LAN > WPS Station

The following table describes the labels in this screen.

Network > Wireless LAN > WPS Station

Push Button

Use this button when you use the PBC (Push Button Configuration) method to 
configure wireless stations’s wireless settings. 

Click this to start WPS-aware wireless station scanning and the wireless security 
information synchronization. 

Or input station’s 
PIN number

Use this button when you use the PIN Configuration method to configure 
wireless station’s wireless settings. 

Type the same PIN number generated in the wireless station’s utility. Then click 
Start to associate to each other and perform the wireless security information 
synchronization.