ZyXEL Communications NBG4615 User Manual
NBG4615 User’s Guide
185
C
H A P T E R
2 3
RIP
23.1 Overview
Routing Information Protocol (RIP) is an interior or intra-domain routing protocol that uses
distance-vector routing algorithms. RIP is used on the Internet and is common in the NetWare
environment as a method for exchanging routing information between routers.
distance-vector routing algorithms. RIP is used on the Internet and is common in the NetWare
environment as a method for exchanging routing information between routers.
23.2 RIP Screen
Use this screen to enable RIPv1 or RIPv2, which are LAN broadcast protocols. Click Network >
RIP. The screen appears as shown.
RIP. The screen appears as shown.
Figure 118
Network > RIP
The following table describes the labels in this screen.
Table 74
Network > RIP
LABEL
DESCRIPTION
RIP
Select the RIPv1 or RIPv2 you want the NBG4615 to use.
Otherwise select None.
Apply
Click Apply to save your changes back to the NBG4615.
Cancel
Click Cancel to begin configuring this screen afresh.