ZyXEL Communications NBG4615 User Manual

Chapter 29 Maintenance

NBG4615 User’s Guide

The following table describes the labels in this screen.

It is strongly recommended that you change your NBG4615's password. 

If you forget your NBG4615's password (or IP address), you will need to reset the device. See 

 for details.

Click Maintenance > Password. The screen appears as shown.

Maintenance > Password 

The following table describes the labels in this screen.

Maintenance > General

System Setup

System Name

System Name is a unique name to identify the NBG4615 in an Ethernet 
network.

Domain Name

Enter the domain name you want to give to the NBG4615.

Administrator 
Inactivity Timer

Type how many minutes a management session can be left idle before the 
session times out. The default is 5 minutes. After it times out you have to log in 
with your password again. Very long idle timeouts may have security risks. A 
value of "0" means a management session never times out, no matter how long 
it has been left idle (not recommended).

Apply

Click Apply to save your changes back to the NBG4615.

Cancel

Click Cancel to begin configuring this screen afresh.

Maintenance > Password

Password Setup

Change your NBG4615’s password (recommended) using the fields as shown.

Old Password

Type the default password or the existing password you use to access the 
system in this field.

New Password

Type your new system password (up to 30 characters). Note that as you type 
a password, the screen displays an asterisk (*) for each character you type.

Retype to Confirm

Type the new password again in this field.

Apply

Click Apply to save your changes back to the NBG4615.

Cancel

Click Cancel to begin configuring this screen afresh.