ZyXEL Communications NBG4615 User Manual

NBG4615 User’s Guide

The following tables summarize the NBG4615’s hardware and firmware features.

Hardware Features

Dimensions

162 mm (W) x 106 mm (D) x 28 mm (H)

Weight

285g

SDRAM

32 MB

Flash Memory

8 MB

Power Specification

Input: 100~240 AC, 50~60 Hz

Output: 12 V DC 1.5A

Ethernet ports

Auto-negotiating: 100 Mbps, 1000 Mbps in either half-duplex or full-
duplex mode.

Auto-crossover: Use either crossover or straight-through Ethernet cables.

Built-in Switch

You can use either straight-through or crossover Ethernet cables (MDI/
MDI-X support) to connect multiple computers or servers (for example, 
game servers) in your network to the NBG4615.

LEDs

Power, LAN1-4, WAN, Internet/WPS, USB1-2

Reset button

The reset button is built into the rear panel. Use this button to restore the 
NBG4615 to its factory default settings. Press for 1 second to restart the 
device. Press for 5 seconds to restore to factory default settings.

WPS button

Press the WPS on two WPS enabled devices within 120 seconds for a 
security-enabled wireless connection.

Power switch

Turn on or turn off the power of the NBG4615 using this switch.

WLAN switch

Turn on or turn off the wireless function of the NBG4615 using this switch. 
There is no need to go into the Web Configurator. 

Antenna

The NBG4615 is equipped with two 2dBi (2.4GHz) detachable antenna to 
provide clear radio transmission and reception on the wireless network. 

USB Port

The NBG4615 has two built-in USB 2.0 type A for USB device connectivity 
and supports 3G USB dongle. 

Operation Environment

Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF

Humidity: 10% ~ 90% 

Storage Environment

Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF

Humidity: 10% ~ 95% 

Firmware Features

Default LAN IP Address

192.168.1.1 (router)

192.168.1.2. (AP)

Default LAN Subnet Mask

255.255.255.0 (24 bits)