ZyXEL Communications NBG4615 User Manual

 Chapter 3 ZyXEL NetUSB Share Center Utility

NBG4615 User’s Guide

The following table describes the icons in this window.

This section describes the utility’s menus.

ZyXEL NetUSB Share Center Utility Menus

ZyXEL NetUSB Share Center Utility Main Window Icons

Configure Server

Click to open the NBG4615’s built-in Web Configurator, which you can use to 
set up the NBG4615 (see 

 for details).

Auto-Connect Printer

You can set the selected printer to ‘auto-connect’ after you have connected it 
to your computer during inital connection. If the printer is auto-connected to 
your computer, they will always be connected over the network. You do not 
need to configure it manually each time.

Note: If the computer is connecting to the shared USB printer for the first time, 

you need to click Connect and setup the printer before you can use the 
Auto-Connect Printer function. See 

 for more 

details. 

Note: You first must install the appropriate drivers for the printer that you intend 

to use.

Connect

Select a USB device and then click this button to connect to it. Your computer 
can connect to as many USB devices as are connected to the NBG4615.

Disconnect

Select a device to which your computer is connected and then click this 
button to disconnect from it.

Request to Connect

Some USB devices may not allow automatic connections over the network. If 
so, select the device in question and click this button to issue a request to 
connect to it.

Network Scanner

Click this to open the scanner options on your computer for working with a 
scanner connected to the network.