ZyXEL Communications NBG4615 User Manual
Chapter 5 Introducing the Web Configurator
NBG4615 User’s Guide
47
5.3 Resetting the NBG4615
If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the RESET button at the back of the NBG4615 to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the password
will be reset to “1234” and the IP address will be reset to “192.168.1.1”.
to use the RESET button at the back of the NBG4615 to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the password
will be reset to “1234” and the IP address will be reset to “192.168.1.1”.
5.3.1 How to Use the RESET Button
1
Make sure the power LED is on.
2
Press the RESET button for longer than 1 second to restart/reboot the NBG4615.
3
Press the RESET button for longer than 5 seconds to set the NBG4615 back to its factory-default
configurations.
configurations.