ZyXEL Communications NBG4615 User Manual
Chapter 12 WISP Mode
NBG4615 User’s Guide
92
2
The default IP address of the NBG4615 is “192.168.1.1”. If you did not change this, you can use the
same IP address in WISP Mode. Open a web browser such as Internet Explorer and type
“192.168.1.1” as the web address in your web browser.
same IP address in WISP Mode. Open a web browser such as Internet Explorer and type
“192.168.1.1” as the web address in your web browser.
If you changed the IP address of your NBG4615 while in Router mode, use this IP address in WISP
Mode. The WISP Mode IP address is always the same as the Router mode IP address.
Mode. The WISP Mode IP address is always the same as the Router mode IP address.
Note: After clicking Login, the Easy Mode appears. Refer to
for the
Easy Mode screens. Click Expert mode to see the screens described in the
sections following this.
12.4 WISP Mode Status Screen
Click
to open the status screen.
Figure 63
Status: WISP Mode
The following table describes the labels shown in the Status screen.
Table 37
Status Screen: WISP Mode
LABEL
DESCRIPTION
Logout
Click this at any time to exit the Web Configurator.
Device Information
Host Name
This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
identification purposes.
Firmware Version
This is the firmware version and the date created.