ZyXEL Communications NBG-419N User Manual
Chapter 18 Static Route
NBG-419N v2 User’s Guide
148
18.3 IP Static Route Screen
Click Network > Static Route to open the IP Static Route screen.
Figure 105
Network > Static Route
The following table describes the labels in this screen.
Table 67
Network > Static Route
LABEL
DESCRIPTION
Static Routing Settings
Route Name
Enter a the name that describes or identifies this route.
Destination IP
Address
Address
Enter the IP network address of the final destination.
IP Subnet
Netmask
Netmask
This is the subnet to which the route’s final destination belongs.
Gateway IP
Address
Address
Enter the the IP address of the gateway.
Metric
Assign a number to identify the route.
Add Rule
Click this to add the IP static route.
Application Rules Summary
No.
This is the number of an individual static route.
Active
The rules are always on and this is indicated by the icon.
Name
This is the name that describes or identifies this route.
Destination
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
always based on network number.
Gateway
This is the IP address of the gateway. The gateway is a router or switch on the
same network segment as the device's LAN or WAN port. The gateway helps
forward packets to their destinations.
same network segment as the device's LAN or WAN port. The gateway helps
forward packets to their destinations.