ZyXEL Communications NBG-419N User Manual

 Chapter 3 Connection Wizard

NBG-419N v2 User’s Guide

The following table describes the labels in this screen.

Choose WPA-PSK or WPA2-PSK security in the Wireless Security screen to set up a password for 
your wireless network.

Wireless Security: WPA-PSK/WPA2-PSK

The following table describes the labels in this screen. 

Wireless Security: No Security

Wireless 
Network Name 
(SSID)

Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. 

If you change this field on the Router, make sure all wireless stations use the same SSID in 
order to access the network. 

Security mode

Select a Security level from the drop-down list box. 

Choose None to have no wireless LAN security configured. If you do not enable any wireless 
security on your Router, your network is accessible to any wireless networking device that is 
within range. 

Exit

Click this to close the wizard screen without saving.

Back

Click this to return to the previous screen.

Next

Click this to continue. 

Wireless Security: WPA-PSK/WPA2-PSK

Wireless 
Network Name 
(SSID)

Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. 

If you change this field on the Router, make sure all wireless stations use the same SSID in 
order to access the network. 

Security mode

Select a Security level from the drop-down list box.

Choose WPA-PSK or WPA2-PSK security to configure a Pre-Shared Key. Choose this 
option only if your wireless clients support WPA-PSK or WPA2-PSK respectively.

Wireless 
password

Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless 
connection by configuring WPA in the wireless LAN screens.

Verify Password Retype the password to confirm.

Exit

Click this to close the wizard screen without saving.