ZyXEL Communications NBG-419N User Manual
Chapter 10 WISP Mode
NBG-419N v2 User’s Guide
78
Note: After clicking Login, the Easy mode appears. Refer to
for the
Easy mode screens. Click Expert mode to see the screens described in the sections
following this.
10.4 WISP Mode Status Screen
Click
to open the status screen.
Figure 56
Status: WISP Mode
The following table describes the labels shown in the Status screen.
Table 34
Status Screen: WISP Mode
LABEL
DESCRIPTION
Logout
Click this at any time to exit the Web Configurator.
Device Information
Host Name
This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
identification purposes.
Firmware Version
This is the firmware version and the date created.
Sys OP Mode
This is the device mode (
) to which the Router is set - WISP Mode.
WAN Information