ZyXEL Communications NBG-419N User Manual
Chapter 25 Maintenance
NBG-419N v2 User’s Guide
180
The following table describes the labels in this screen.
25.4 Password Screen
It is strongly recommended that you change your Router's password.
If you forget your Router's password (or IP address), you will need to reset the device. See
for details.
Click Maintenance > Password. The screen appears as shown.
Figure 129
Maintenance > Password
The following table describes the labels in this screen.
Table 79
Maintenance > General
LABEL
DESCRIPTION
System Setup
System Name
System Name is a unique name to identify the Router in an Ethernet network.
Domain Name
Enter the domain name you want to give to the Router.
Administrator
Inactivity Timer
Inactivity Timer
Type how many minutes a management session can be left idle before the
session times out. The default is 5 minutes. After it times out you have to log in
with your password again. Very long idle timeouts may have security risks. A
value of "0" means a management session never times out, no matter how long
it has been left idle (not recommended).
session times out. The default is 5 minutes. After it times out you have to log in
with your password again. Very long idle timeouts may have security risks. A
value of "0" means a management session never times out, no matter how long
it has been left idle (not recommended).
Apply
Click Apply to save your changes back to the Router.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 80
Maintenance > Password
LABEL
DESCRIPTION
Password Setup Change your Router’s password (recommended) using the fields as shown.
Old Password
Type the default password or the existing password you use to access the system in this
field.
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays an asterisk (*) for each character you type.
the screen displays an asterisk (*) for each character you type.
Retype to
Confirm
Confirm
Type the new password again in this field.
Apply
Click Apply to save your changes back to the Router.
Reset
Click Reset to begin configuring this screen afresh.