ZyXEL Communications NBG-419N User Manual
Chapter 9 Access Point Mode
NBG-419N v2 User’s Guide
72
9.4 AP Mode Status Screen
Click
to open the Status screen.
Figure 50
Status Screen: Access Point Mode
The following table describes the labels shown in the Status screen.
Table 32
Status Screen: Access Point Mode
LABEL
DESCRIPTION
Logout
Click this at any time to exit the Web Configurator.
Device Information
Host Name
This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
identification purposes.
Firmware Version
This is the firmware version and the date created.
Sys OP Mode
This is the device mode (
) to which the Router is set - Access
Point Mode.
LAN Information
- MAC Address
This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address
This shows the LAN port’s IP address.
- IP Subnet Mask
This shows the LAN port’s subnet mask.
- DHCP
This shows the LAN port’s DHCP role - Server, Client or None.
WLAN Information