ZyXEL Communications HS100/HS100W User Manual
HomeSafe User’s Guide
8-2
WAN
Table 8-1 WAN : Route
LABEL DESCRIPTION
WAN
Traffic
Redirect
Traffic
Redirect
The default WAN connection is "1' as your broadband connection via the WAN port
should always be your preferred method of accessing the WAN. The default priority of
the routes is WAN and then Traffic Redirect.
should always be your preferred method of accessing the WAN. The default priority of
the routes is WAN and then Traffic Redirect.
Apply
Click Apply to save your changes back to the HomeSafe.
Reset
Click Reset to begin configuring this screen afresh.
8.4 Configuring WAN ISP
To change your HomeSafe’s WAN ISP settings, click WAN, then the WAN ISP tab. The screen
differs by the encapsulation.
differs by the encapsulation.
8.4.1 Ethernet
Encapsulation
The screen shown next is for Ethernet encapsulation.
Figure 8-2 WAN ISP : Ethernet Encapsulation
The following table describes the labels in this screen.
Table 8-2 WAN ISP : Ethernet Encapsulation
LABEL DESCRIPTION
Encapsulation
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Ethernet.
Service Type
Choose from Standard, Telstra (RoadRunner Telstra authentication method), RR-
Manager (Roadrunner Manager authentication method), RR-Toshiba (Roadrunner
Toshiba authentication method) or Telia Login.
Manager (Roadrunner Manager authentication method), RR-Toshiba (Roadrunner
Toshiba authentication method) or Telia Login.
The following fields do not appear with the Standard service type.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.
Retype to Confirm
Type the password again to make sure that you have entered it correctly.
Login Server IP
Address
Address
Type the authentication server IP address here if your ISP gave you one.