ZyXEL Communications HS100/HS100W User Manual
HomeSafe User’s Guide
NAT Screens
10-3
Table 10-2 Static Route: Edit
LABEL DESCRIPTION
Metric
Metric represents the “cost” of transmission for routing purposes. IP routing uses hop
count as the measurement of cost, with a minimum of 1 for directly connected
networks. Enter a number that approximates the cost for this link. The number need
not be precise, but it must be between 1 and 15. In practice, 2 or 3 is usually a good
number.
count as the measurement of cost, with a minimum of 1 for directly connected
networks. Enter a number that approximates the cost for this link. The number need
not be precise, but it must be between 1 and 15. In practice, 2 or 3 is usually a good
number.
Private
This parameter determines if the HomeSafe will include this route to a remote node in
its RIP broadcasts.
its RIP broadcasts.
Select this check box to keep this route private and not included in RIP broadcasts.
Clear this checkbox to propagate this route to other hosts through RIP broadcasts.
Clear this checkbox to propagate this route to other hosts through RIP broadcasts.
Apply
Click Apply to save your changes back to the HomeSafe.
Cancel
Click Cancel to return to the previous screen and not save your changes.