ZyXEL Communications HS100/HS100W User Manual
HomeSafe User’s Guide
Static Route Setup
23-1
Chapter 23
Static Route Setup
This chapter shows how to setup IP static routes.
23.1 IP Static Route Setup
Step 1.
To configure an IP static route, use Menu 12 – Static Routing Setup (shown next).
Figure 23-1 Menu 12 IP Static Route Setup
Step 2.
Now, type the route number of a static route you want to configure.
Figure 23-2 Menu12.1 Edit IP Static Route
The following table describes the fields for Menu 12.1 – Edit IP Static Route Setup.
Table 23-1 Menu12.1 Edit IP Static Route
FIELD DESCRIPTION
Route #
This is the index number of the static route that you chose in menu 12.1.
Route Name
Type a descriptive name for this route. This is for identification purpose only.
Active
This field allows you to activate/deactivate this static route.
Destination IP
Address
Address
This parameter specifies the IP network address of the final destination. Routing
is always based on network number. If you need to specify a route to a single
host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the
network number to be identical to the host ID.
is always based on network number. If you need to specify a route to a single
host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the
network number to be identical to the host ID.
Menu 12.1 - Edit IP Static Route
Route #: 1
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
fi
l
Menu 12 - IP Static Route Setup
1. ________
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter selection number: