ZyXEL Communications HS100/HS100W User Manual

Page of 357
HomeSafe User’s Guide 
System Screens 
 
4-1 
Chapter 4 
System Screens 
This chapter provides information on the System screens.  
4.1 System 
Overview 
See the Wizard Setup chapter for more information on the next few screens. 
4.2  Configuring General Setup  
Click SYSTEM to open the General screen. 
 
Figure 4-1 SYSTEM : General Setup  
The following table describes the labels in this screen. 
Table 4-1 SYSTEM : General Setup 
LABEL DESCRIPTION 
System Name 
Choose a descriptive name for identification purposes. It is recommended you enter 
your computer’s “Computer name” in this field (see the Wizard Setup chapter for how 
to find your computer’s name). This name can be up to 30 alphanumeric characters 
long. Spaces are not allowed, but dashes “-” and underscores "_" are accepted. 
Domain Name 
Enter the domain name (if you know it) here. If you leave this field blank, the ISP may 
assign a domain name via DHCP.  
The domain name entered by you is given priority over the ISP assigned domain 
name. 
Administrator 
Inactivity Timer 
Type how many minutes a management session (either via the web configurator or 
SMT) can be left idle before the session times out. The default is 5 minutes. After it 
times out you have to log in with your password again. Very long idle timeouts may 
have security risks. A value of "0" means a management session never times out, no 
matter how long it has been left idle (not recommended). 
System DNS Servers (if applicable) 
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice 
versa. The DNS server is extremely important because without it, you must know the IP address of a 
computer before you can access it. The HomeSafe uses a system DNS server (in the order you specify 
here) to resolve domain names for VPN, DDNS and the time server.