ZyXEL Communications NBG4115 User Manual

Chapter 7 Wireless LAN

User’s Guide

Use this screen when you want to add a wireless station using WPS. To open this 
screen, click Network > Wireless LAN > WPS Station tab.

Note: Note: After you click Push Button on this screen, you have to press a similar 

button in the wireless station utility within 2 minutes. To add the second wireless 
station, you have to press these buttons on both device and the wireless station 
again after the first 2 minutes.

Figure 51   WPS Station

The following table describes the labels in this screen.

Apply

Click Apply to save your changes back to the NBG4115.

Refresh

Click Refresh to get this screen information afresh.

Table 33   WPS

Table 34   WPS Station

Push Button

Use this button when you use the PBC (Push Button Configuration) 
method to configure wireless stations’s wireless settings. See 

.

Click this to start WPS-aware wireless station scanning and the wireless 
security information synchronization. 

Or input 
station’s PIN 
number

Use this button when you use the PIN Configuration method to 
configure wireless station’s wireless settings. See 

.

Type the same PIN number generated in the wireless station’s utility. 
Then click Start to associate to each other and perform the wireless 
security information synchronization.