ZyXEL Communications ISG50 User Manual
Chapter 7 General Tutorials
ISG50 User’s Guide
118
7.5.2 Set Up User Groups
Set up the user groups and assign the users to the user groups.
1
Click Configuration > Object > User/Group > Group. Click the Add icon.
2
Enter the name of the group that is used in the example in
. In this example,
it is “Finance”. Then, select User/Leo and click the right arrow to move him to the Member list.
This example only has one member in this group, so click OK. Of course you could add more
members later.
This example only has one member in this group, so click OK. Of course you could add more
members later.
Figure 87
Configuration > Object > User/Group > Group > Add
3
Repeat this process to set up the remaining user groups.
7.5.3 Set Up User Authentication Using the RADIUS Server
This step sets up user authentication using the RADIUS server. First, configure the settings for the
RADIUS server. Then, set up the authentication method, and configure the ISG50 to use the
authentication method. Finally, force users to log in to the ISG50 before it routes traffic for them.
RADIUS server. Then, set up the authentication method, and configure the ISG50 to use the
authentication method. Finally, force users to log in to the ISG50 before it routes traffic for them.
1
Click Configuration > Object > AAA Server > RADIUS. Double-click the radius entry.
Configure the RADIUS server’s address authentication port (1812 if you were not told otherwise),
key, and click Apply.
Configure the RADIUS server’s address authentication port (1812 if you were not told otherwise),
key, and click Apply.