ZyXEL Communications ISG50 User Manual
Chapter 30 Outbound Trunk Group
ISG50 User’s Guide
496
Each field is described in the following table.
30.2.7 FXO or BRI Auto Attendant
Use this screen to select which auto-attendant should be used with this outbound line group. See
for information on configuring auto-attendant. In the Outbound Trunk
Group configuration screen, select an FXO or BRI trunk and click the Auto-Attendant icon to view
the screen as shown.
the screen as shown.
Figure 318
AA for FXO or BRI Trunk
Table 171
Add/Edit FXO Trunk
LABEL
DESCRIPTION
Trunk Name
Type the name of this FXO interface group. This field can be 1-30 alphanumeric characters
(A-Z, a-z, 0-9) and underscores (_). The first character must be a letter.
(A-Z, a-z, 0-9) and underscores (_). The first character must be a letter.
Description
Type the description for this FXO interface. This field can be 0-63 alphanumeric characters
(A-Z, a-z, 0-9), underscores (_), hyphens (-) and spaces. 0 means this field can be left
blank.
(A-Z, a-z, 0-9), underscores (_), hyphens (-) and spaces. 0 means this field can be left
blank.
Available
Interface
Interface
This column displays the FXO ports available on the ISG50. Highlight one of the FXO ports
and click the Right icon if you want to add it to this outbound line group.
and click the Right icon if you want to add it to this outbound line group.
Used Interface
This column displays the FXO ports currently configured for this outbound line group.
Highlight one of the FXO ports and click the Left icon if you want to remove it from the
outbound line group.
Highlight one of the FXO ports and click the Left icon if you want to remove it from the
outbound line group.
If you configure more than one interfaces in this outbound line group, the ISG50 check
and pick one of them available for an outgoing call.
and pick one of them available for an outgoing call.
OK
Click OK to save your customized settings and exit this screen.
Cancel
Click Cancel to exit this screen without saving.