ZyXEL Communications ISG50 User Manual
Chapter 31 Auto-attendant
ISG50 User’s Guide
513
31.3.5 Auto Attendant Settings: Night Service
Use this screen to configure Night Service settings for this auto-attendant. You only need to
configure this screen if you want the auto-attendant to perform different actions outside of regular
office hours.
configure this screen if you want the auto-attendant to perform different actions outside of regular
office hours.
In the Configuration > PBX > Outbound Line Management > Auto-Attendant > Customized
screen click the Add or Edit icon for an item in the auto-attendant list and select the Night
Service tab to view a screen as shown next.
screen click the Add or Edit icon for an item in the auto-attendant list and select the Night
Service tab to view a screen as shown next.
Figure 334
Night Service Setting
Each field is described in the following table.
Table 181
Night Service Setting
LABEL
DESCRIPTION
Enable Night
Service
Service
Select this to activate the night service settings for this auto-attendant or clear it to turn
them off.
them off.
Upload Audio File
Click Browse to locate an audio file to be used as the auto-attendant greeting message,
and Upload to copy it to IP-PBX.
and Upload to copy it to IP-PBX.
The audio file you upload must meet the following criteria:
•
PCM format, 16 kHz, 16-bit, mono mode (*.wav).
•
The total play time of all the AA audio files combined must be less than 30 minutes.
Record Audio File
Click this to record an audio file through the extension set as the recording peer.
Audio File State
This indicates whether an audio file has been uploaded to the ISG50 or not. You can also
Playback the audio file to hear how it sounds.
Playback the audio file to hear how it sounds.