ZyXEL Communications ISG50 User Manual
Chapter 33 Group Management
ISG50 User’s Guide
531
33.2.1 Edit Group Management Associations
Use this screen to configure links from an authority group or an outbound line group to authority
groups, or LCRs configured on the ISG50. To access this screen, select the group you want to
configure in the Configuration > PBX > Group Management screen and click Edit.
groups, or LCRs configured on the ISG50. To access this screen, select the group you want to
configure in the Configuration > PBX > Group Management screen and click Edit.
Figure 352
Configuration > PBX > Group Management > Edit
Each field is described in the following table.
Table 187
Configuration > PBX > Group Management > Edit
LABEL
DESCRIPTION
#
This field is a sequential value, and it is not associated with a specific entry.
Group Name
This field displays the name of an authority group or LCR to which you can configure a
link.
link.
Description
This field displays the description of the group to which you can create a link.
Group Type
This field identifies whether you are creating a link to:
Authority Group - another set of extensions on the ISG50.
LCR - an outbound dialing rule containing outbound line groups.
Association
Select this to link a group you are configuring to another group. Clear it to remove a link
between the group you are configuring and another group.
between the group you are configuring and another group.
OK
Click OK to save your customized settings and exit this screen.
Cancel
Click Cancel to exit this screen without saving.