ZyXEL Communications ISG50 User Manual
Chapter 52 System
ISG50 User’s Guide
671
7
Click Apply.
To get the ISG50 date and time from a time server
1
Click System > Date/Time.
2
Select Get from Time Server under Time and Date Setup.
3
Under Time Zone Setup, select your Time Zone from the list.
4
As an option you can select the Enable Daylight Saving check box to adjust the ISG50 clock for
daylight savings.
daylight savings.
5
Under Time and Date Setup, enter a Time Server Address (
).
6
Click Apply.
52.5 Console Port Speed
This section shows you how to set the console port speed when you connect to the ISG50 via the
console port using a terminal emulation program. See
console port using a terminal emulation program. See
for default console port
settings.
Click Configuration > System > Console Speed to open the Console Speed screen.
Figure 445
Configuration > System > Console Speed
The following table describes the labels in this screen.
Table 268
Configuration > System > Console Speed
LABEL
DESCRIPTION
Console Port Speed Use the drop-down list box to change the speed of the console port. Your ISG50
supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the
console port.
console port.
The Console Port Speed applies to a console port connection using terminal
emulation software and NOT the Console in the ISG50 Web Configurator
Status screen.
emulation software and NOT the Console in the ISG50 Web Configurator
Status screen.
Apply
Click Apply to save your changes back to the ISG50.
Reset
Click Reset to return the screen to its last-saved settings.