ZyXEL Communications ISG50 User Manual
ISG50 User’s Guide
753
C
H A P T E R
5 8
Reboot
58.1 Overview
Use this to restart the device (for example, if the device begins behaving erratically). See also
for information on different ways to start and stop the ISG50.
58.1.1 What You Need To Know
If you applied changes in the Web configurator, these were saved automatically and do not change
when you reboot. If you made changes in the CLI, however, you have to use the write command to
save the configuration before you reboot. Otherwise, the changes are lost when you reboot.
when you reboot. If you made changes in the CLI, however, you have to use the write command to
save the configuration before you reboot. Otherwise, the changes are lost when you reboot.
Reboot is different to reset; (see
) reset returns the device to its default
configuration.
58.2 The Reboot Screen
The Reboot screen is part of the Web configurator so that remote users can restart the device. To
access this screen, click Maintenance > Reboot.
access this screen, click Maintenance > Reboot.
Figure 520
Maintenance > Reboot
Click the Reboot button to restart the ISG50. Wait a few minutes until the login screen appears. If
the login screen does not appear, type the IP address of the device in your Web browser.
the login screen does not appear, type the IP address of the device in your Web browser.
You can also use the CLI command reboot to restart the ISG50.