ZyXEL Communications NWA1100-N User Manual
Chapter 4 Tutorial
NWA1100-N User’s Guide
52
2
Select Allow Listed in the Access Control Mode field. Enter the MAC addresses of the wireless
clients (W, Y and Z) you want to associate with the NWA. Click Apply.
clients (W, Y and Z) you want to associate with the NWA. Click Apply.
Now, only the authorized wireless clients (W, Y and Z) can access the FTP server.
4.3.5 Testing the Connection and Troubleshooting
This section discusses how you can check if you have correctly configured your network setup as
described in this tutorial.
described in this tutorial.
• Try accessing the FTP server from wireless clients W, Y or Z. Test if you can send or retrieve a
file. If you cannot establish a connection with the FTP server, do the following steps.
1
Make sure W, Y and Z use the same wireless security settings as A and can access A.
2
Make sure B uses the same wireless and wireless security settings as A and can access A.
3
Make sure intra-BSS traffic is enabled on A.
• Try accessing the FTP server from X. If you are able to access the FTP server, do the following.
1
Make sure MAC filtering is enabled.
2
Make sure X’s MAC address is not entered in the list of allowed devices.