ZyXEL Communications NWA1100-N User Manual

 Chapter 5 System Screens

NWA1100-N User’s Guide

This section provides some technical information about the topics covered in this chapter.

When you turn on the NWA for the first time, the date and time start at 2000-01-01 00:00:00. 
When you select Auto in the System > Time Setting screen, the NWA then attempts to 
synchronize with one of the following pre-defined list of NTP time servers.

The NWA continues to use the following pre-defined list of NTP time servers if you do not specify a 
time server or it cannot synchronize with the time server you specified. 

When the NWA uses the pre-defined list of NTP time servers, it randomly selects one server and 
tries to synchronize with it. If the synchronization fails, then the NWA goes through the rest of the 
list in order from the first one tried until either it is successful or all the pre-defined NTP time 
servers have been tried.

Manual IP

Enter the IP address or URL of your time server. Check with your ISP/
network administrator if you are unsure of this information.

Time Zone Setup

Time Zone

Choose the time zone of your location. This will set the time difference 
between your time zone and Greenwich Mean Time (GMT). 

Apply

Click Apply to save your changes.

Refresh

Click Refresh to reload the previous configuration for this screen.

System > Time (continued)

Default Time Servers

ntp1.cs.wisc.edu

ntp1.gbg.netnod.se

ntp2.cs.wisc.edu

tock.usno.navy.mil

ntp3.cs.wisc.edu

ntp.cs.strath.ac.uk

ntp1.sp.se

time1.stupi.se

tick.stdtime.gov.tw

tock.stdtime.gov.tw

time.stdtime.gov.tw