ZyXEL Communications NWA1100-N User Manual
Chapter 6 Wireless Settings Screen
NWA1100-N User’s Guide
70
6.4.4 Wireless Client Mode
Use this screen to turn your NWA into a wireless client. Select Wireless Client as the Operation
Mode. The following screen displays.
Mode. The following screen displays.
Figure 27
Wireless > Wireless Settings: Wireless Client
The following table describes the general wireless LAN labels in this screen.
Table 13
Wireless > Wireless Settings: Wireless Client
LABEL
DESCRIPTION
Basic Settings
Operation Mode
Select Wireless Client in this field.
Site Survey
Click this to view a list of available wireless access points within the range. Select
the AP you want to use and click Selected.
the AP you want to use and click Selected.
Note: After selecting Wireless Client as the Operation Mode in the Basic
Settings section, you must click Apply to be able to select from the AP list.
Wireless Mode
Select 802.11b/g to allow both IEEE802.11b and IEEE802.11g compliant WLAN
devices to associate with the NWA. The transmission rate of your NWA might be
reduced.
devices to associate with the NWA. The transmission rate of your NWA might be
reduced.
Select 802.11b/g/n to allow IEEE802.11b, IEEE802.11g and IEEE802.11n
compliant WLAN devices to associate with the NWA. The transmission rate of the
NWA might be reduced.
compliant WLAN devices to associate with the NWA. The transmission rate of the
NWA might be reduced.