ZyXEL Communications LTE6100 User Manual
Chapter 4 Broadband
LTE6100 User’s Guide
32
If your ISP assigns you a static WAN IP address, they should also assign you the subnet mask and
DNS server IP address(es).
DNS server IP address(es).
APN
Access Point Name (APN) is a unique string which indicates an LTE network. An APN is required for
LTE stations to enter the LTE network and then the Internet.
LTE stations to enter the LTE network and then the Internet.
4.1.3 Before You Begin
You may need to know your Internet access settings such as LTE APN, WAN IP address and SIM
card’s PIN code if the INTERNET light on your LTE Device is off. Get this information from your
service provider.
card’s PIN code if the INTERNET light on your LTE Device is off. Get this information from your
service provider.
4.2 The Broadband Screen
The LTE Device must have a WAN interface to allow users to use the LTE connection to access the
Internet. Use the Broadband screen to view or modify a WAN interface.
Internet. Use the Broadband screen to view or modify a WAN interface.
Click Network Setting > Broadband. The following screen opens.
Figure 13
Network Setting > Broadband
The following table describes the fields in this screen.
4.2.1 Edit Internet Connection
Use this screen to configure a WAN connection.
Table 4
Network Setting > Broadband
LABEL
DESCRIPTION
Internet Setup
Name
This is the service name of the connection.
APN
This is the name of the LTE network to which the LTE Device will connect.
IPv6/IPv4 Mode
This shows whether the connection uses IPv6 or IPv4.
NAT
This shows whether NAT is activated or not for this connection. NAT is not available
when the connection uses the bridging service.
when the connection uses the bridging service.
Modify
Click the Edit icon to configure the connection.
Click the Delete icon to delete this connection from the Device. A window displays
asking you to confirm that you want to delete the connection.
asking you to confirm that you want to delete the connection.