ZyXEL Communications PLA450 Series User Manual
ENGLISH
3
1 Initial Hardware Connections
1 Screw the antenna clockwise onto the antenna connector. Make sure it is securely
attached. Point the antenna up (perpendicular to the ground).
2 Use the yellow (Ethernet) cable to connect the PLA450’s LAN port to the Ethernet port
on your computer.
3 Use the included power cord to connect the POWER socket to an appropriate power
source. This is also your powerline connection.
1.1 Look at the LEDs (lights)
• Power (
): Blinks until the device is ready.
• HomePlug (
): Turns on when connected to other HomePlug AV device(s).
• LAN (
): Turns on if the LAN connection to your computer is OK.
• WLAN (
): Turns on if the wireless LAN feature is on.
1
2
3