ZyXEL Communications 660RU-Tx Series User Manual

Prestige 660RU-Tx Series User’s Guide

275

Appendix G

 

 

 

Table 98   System Error Logs

%s exceeds the max. 
number of session per 
host!

This attempt to create a NAT session exceeds the maximum 

number of NAT session table entries allowed to be created per 

host.

setNetBIOSFilter: calloc 
error

The router failed to allocate memory for the NetBIOS filter settings.

readNetBIOSFilter: calloc 
error

The router failed to allocate memory for the NetBIOS filter settings.

WAN connection is down.

A WAN connection is down. You cannot access the network 

through this interface.

Table 99   Packet Filter Logs

[ TCP | UDP | ICMP | IGMP | 
Generic ] packet filter 
matched (set: %d, rule: %d)

Attempted access matched a configured filter rule (denoted by 

its set and rule number) and was blocked or forwarded 

according to the rule.

Table 100   ICMP Logs

Packet without a NAT table entry 
blocked: ICMP

The router blocked a packet that didn’t have a 

corresponding NAT table entry.

Router reply ICMP packet: ICMP

The router sent an ICMP reply packet to the sender.

Table 101   CDR Logs

board %d line %d channel %d, 
call %d, %s C01 Outgoing Call 
dev=%x ch=%x %s

The router received the setup requirements for a call. “call” is 

the reference (count) number of the call. “dev” is the device 

type (3 is for dial-up, 6 is for PPPoE, 10 is for PPTP). 

"channel" or “ch” is the call channel ID.For example,"board 0 

line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 

"Means the router has dialed to the PPPoE server 3 times.