ZyXEL Communications 660RU-Tx Series User Manual

Page of 286
Prestige 660RU-Tx Series User’s Guide
Chapter 1 Getting To Know Your Prestige
36
Figure 2   Prestige LAN-to-LAN Application
1.1.3  Prestige Hardware Installation and Connection
Refer to the Quick Start Guide for information on hardware installation and connection. 
1.1.4  Front Panel LEDs 
The following table describes the LEDs on the front panel. 
Table 2   Front Panel LED Description
LED
COLOR
STATUS
DESCRIPTION
PWR/SYS
Green
On
The Prestige is receiving power and functioning properly.
Blinking
The Prestige is rebooting.
Off
The Prestige is not ready or has malfunctioned.  
Red
On
The power to the Prestige is too low.
10/100M
Green
On
The Prestige has a successful 10Mbps Ethernet connection. 
Blinking
The Prestige is receiving or sending data. 
Amber
On
The Prestige has a successful 100Mbps Ethernet connection. 
Blinking
The Prestige is receiving or sending data. 
Off
The LAN is not connected.
DSL
Green
On
The Prestige is linked successfully to a DSLAM. 
Blinking 
(Slow)
The Prestige is initializing the DSL line. 
Blinking 
(Fast)
The Prestige is sending or receiving non-PPP traffic.
Off
The DSL link is down. 
PPP
Amber
On
The Prestige has a PPP (PPPoA or PPPoE) connection.
Blinking
The Prestige is sending or receiving PPPoA or PPPoE traffic.
Off
The Prestige does not have a PPP (PPPoA or PPPoE) 
connection.
USB
Green
On
The Prestige has an USB connection.
Blinking
The Prestige is sending or receiving data via the USB port.
Off
The Prestige does not have an USB connection.