ZyXEL Communications MAX-206M1R User Manual

Chapter 11 The Phone Screens

User’s Guide

Hang up the phone to drop the connection.

If you want to separate the activated three-way conference into two individual 
connections (one is on-line, the other is on hold), press the flash key and press 
“2”.

This section describes how to use supplementary phone services with the USA 
Type Call Service Mode. Commands for supplementary services are listed in the 
table below.

After pressing the flash key, if you do not issue the sub-command before the 
default sub-command timeout (2 seconds) expires or issue an invalid sub-
command, the current operation will be aborted.

USA Call Hold allows you to put a call (A) on hold by pressing the flash key. 

If you have another call, press the flash key to switch back and forth between 
caller A and B by putting either one on hold.

If you hang up the phone but a caller is still on hold, there will be a remind ring.

USA Call Waiting allows you to place a call on hold while you answer another 
incoming call on the same telephone (directory) number. 

If there is a second call to your telephone number, you will hear a call waiting 
tone. 

Press the flash key to put the first call on hold and answer the second call.

USA Call Transfer allows you to transfer an incoming call (that you have 
answered) to another phone. To do so:

Press the flash key to put the caller on hold.

When you hear the dial tone, dial “*98#” followed by the number to which you 
want to transfer the call. to operate the Intercom.

Table 46   USA Type Flash Key Commands

Flash 

Put a current call on hold to place a second call. After the 
second call is successful, press the flash key again to 
have a three-way conference call.

Put a current call on hold to answer an incoming call.

Flash 

*98#

Transfer the call to another phone.