ZyXEL Communications MAX-206M1R User Manual
Chapter 18 The Logs Screens
User’s Guide
205
18.4 Log Message Descriptions
The following tables provide descriptions of example log messages.
Apply
Click to save your changes.
Cancel
Click to return to the previous screen without saving your changes.
Table 78 TOOLS > Logs > Log Settings
LABEL
DESCRIPTION
Table 79 System Error Logs
LOG MESSAGE
DESCRIPTION
WAN connection is down.
The WAN connection is down. You cannot access the
network through this interface.
network through this interface.
%s exceeds the max.
number of session per
host!
This attempt to create a NAT session exceeds the
maximum number of NAT session table entries allowed to
be created per host.
maximum number of NAT session table entries allowed to
be created per host.
Table 80 System Maintenance Logs
LOG MESSAGE
DESCRIPTION
Time calibration is
successful
The device has adjusted its time based on information
from the time server.
from the time server.
Time calibration failed
The device failed to get information from the time
server.
server.
WAN interface gets IP: %s
The WAN interface got a new IP address from the
DHCP or PPPoE server.
DHCP or PPPoE server.
DHCP client gets %s
A DHCP client got a new IP address from the DHCP
server.
server.
DHCP client IP expired
A DHCP client's IP address has expired.
DHCP server assigns %s
The DHCP server assigned an IP address to a client.
Successful WEB login
Someone has logged on to the device's web
configurator interface.
configurator interface.
WEB login failed
Someone has failed to log on to the device's web
configurator interface.
configurator interface.
TELNET Login Successfully
Someone has logged on to the router via telnet.
TELNET Login Fail
Someone has failed to log on to the router via telnet.
Successful FTP login
Someone has logged on to the device via ftp.
FTP login failed
Someone has failed to log on to the device via ftp.
NAT Session Table is Full!
The maximum number of NAT session table entries
has been exceeded and the table is full.
has been exceeded and the table is full.
Time initialized by Daytime
Server
The device got the time and date from the Daytime
server.
server.