ZyXEL Communications MAX-206M1R User Manual
Chapter 6 The LAN Configuration Screens
User’s Guide
68
6.3 Static DHCP
Click ADVANCED > LAN Configuration > Static DHCP to assign specific IP
addresses to specific computers on the LAN.
addresses to specific computers on the LAN.
Note: This screen has no effect if the DHCP server is not enabled. You can enable it
in ADVANCED > LAN Configuration > DHCP Setup.
Figure 20 ADVANCED > LAN Configuration > Static DHCP
The following table describes the labels in this screen.
Table 14 ADVANCED > LAN Configuration > Static DHCP
LABEL
DESCRIPTION
#
The number of the item in this list.
MAC Address
Enter the MAC address of the computer to which you want the WiMAX
Modem to assign the same IP address.
Modem to assign the same IP address.
IP Address
Enter the IP address you want the WiMAX Modem to assign to the
computer.
computer.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.