ZyXEL Communications MAX-206M1R User Manual

 Chapter 6 The LAN Configuration Screens

User’s Guide

Click ADVANCED > LAN Configuration > Other Settings to set the RIP and 
Multicast options.

Figure 23   ADVANCED > LAN Configuration > Advanced

The following table describes the labels in this screen.

Apply

Click to save your changes.

Cancel

Click to return to the previous screen without saving your changes.

Table 17   Management > Static Route > IP Static Route > Edit (continued)

Table 18   ADVANCED > LAN Configuration > Other Settings

RIP & Multicast Setup
RIP Direction

Use this field to control how much routing information the WiMAX 
Modem sends and receives on the subnet.

• None - The WiMAX Modem does not send or receive routing 

information on the subnet.

• Both - The WiMAX Modem sends and receives routing information 

on the subnet.

• In Only - The WiMAX Modem only receives routing information on 

the subnet.

• Out Only - The WiMAX Modem only sends routing information on 

the subnet.

RIP Version

Select which version of RIP the WiMAX Modem uses when it sends or 
receives information on the subnet.

• RIP-1 - The WiMAX Modem uses RIPv1 to exchange routing 

information.

• RIP-2B - The WiMAX Modem broadcasts RIPv2 to exchange routing 

information.

• RIP-2M - The WiMAX Modem multicasts RIPv2 to exchange routing 

information.