ZyXEL Communications G-3000H User Manual
G-3000H User’s Guide
104
Chapter 8 Other Wireless Configurations
Figure 45 Layer-2 Isolation Application
MAC addresses that are not listed in the Allow devices with these MAC addresses table are
blocked from communicating with the ZyAIR’s wireless clients except for broadcast packets.
Layer-2 isolation does not check the traffic between wireless clients that are associated with
the same AP. Intra-BSS Traffic allows wireless clients associated with the same AP to
communicate with each other.
blocked from communicating with the ZyAIR’s wireless clients except for broadcast packets.
Layer-2 isolation does not check the traffic between wireless clients that are associated with
the same AP. Intra-BSS Traffic allows wireless clients associated with the same AP to
communicate with each other.
8.2 Configuring Layer-2 Isolation
If layer-2 isolation is enabled, you need to know the MAC address of the wireless client, AP,
computer or router that you want to allow to communicate with the ZyAIR's wireless clients.
computer or router that you want to allow to communicate with the ZyAIR's wireless clients.
To configure layer-2 isolation, click the WIRELESS link under ADVANCED and then the
Layer-2 Isolation tab. The screen appears as shown next.
Layer-2 Isolation tab. The screen appears as shown next.