ZyXEL Communications G-3000H User Manual

G-3000H User’s Guide

184

Chapter 17 LAN Setup

The following table describes the fields in this menu.

Enable the roaming feature if you have two or more ZyAIRs on the same subnet. Follow the 
steps below to allow roaming on your ZyAIR. 

1 From the main menu, enter 3 to display Menu 3 – LAN Setup.

2 Enter 5 to display Menu 3.5 – Wireless LAN Setup.

Table 65   Menu 3.5.1 WLAN MAC Address Filter

Active

To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER]. 

Filter Action 

Define the filter action for the list of MAC addresses in the MAC address filter table. 
To deny access to the ZyAIR, press [SPACE BAR] to select Deny Association and press 

[ENTER].  MAC addresses not listed will be allowed to access the router.

The default action, Allowed Association, permits association with the ZyAIR. MAC 

addresses not listed will be denied access to the router. 

MAC Address Filter

1..32

Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are 

allowed or denied access to the ZyAIR in these address fields. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to 

save your configuration or press [ESC] to cancel and go back to the previous screen.