ZyXEL Communications G-3000H User Manual

G-3000H User’s Guide

196

Chapter 19 VLAN Setup

Active

To enable a VLAN mapping profile, press [SPACE BAR] to select Yes and 

press [ENTER].

ID

Press [SPACE BAR] to select a VLAN ID or enter one from 1 to 4094. 

Incoming traffic from the WLAN is authorized and assigned  a VLAN ID by the 

RADIUS server before it is sent to the LAN interface of the wireless client. 

Different SSID profiles can use the same or different VLAN IDs. This allows 

you to split wireless stations into groups using similar VLAN IDs.

Name

Press [SPACE BAR] to select a name or type a name to have the ZyAIR check 

for specific VLAN attributes on incoming messages from the RADIUS server. 

Access-accept packets sent by the RADIUS server contain VLAN related 

attributes. The configured Name field is checked against these attributes. If 

the configured Name field matches these attributes, the corresponding VLAN 

ID entry is used to access the specific VLAN group. If the configured Name 

field does not match the VLAN related attributes sent from the RADIUS server, 

a wireless station is assigned the associated SSID VLAN ID. See VLAN ID in 

the SSID screen. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC 

to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Table 71   Menu 16 VLAN Setup